---------------- Note:
Quantities over 100 pcs may require a special order
item#
approx wt
per pole
length
1-24
pcs
25+
pcs
.490" POLES
18"
#4100
section withinsert .490" diam- black
1.35 oz/ 39 gm
18"
$5.14 ea.
$4.99 ea.
18"
#4101
section w/o insert .490" diam- black
1.10 oz/ 32 gm
18"
$4.25 ea.
$4.15 ea.
Special note: 10 poles w/inserts weigh 13.50 oz/ 384 gm. (Note:
These poles weigh slightly less than the .433" poles)
item#
approx wt
per pole
length
1-4
pcs
5-24
pcs
25+
pcs
26"
#4154
section withinsert .490" diam- black (int'l customers see note below)
1.8 oz/ 50 gm
26"
$8.72 ea.
only 2 pcs until prob end of Oct 2024
N/A
N/A
>
26"
#4155
section w/o insert .490" diam- black
(int'l customers see note below)
1.4 oz/ 40 gm
26"
$7.70 ea.
out of stock until prob end of Oct 2024
N/A
N/A
Special note:
10 poles w/inserts weigh 18.4 oz/ 520 gm. (Note: These poles
weigh slightly less than the .433" poles)
Note: Due to shipping regulations we cannot
ship 26" poles internationally (including Canada)
item#
approx wt
per pole
length
1-24
pcs
25+
pcs
.490" ENDTIPS
#4122
compression grommet style for .490" diam
(cannot accommodate shockcord - to shockcord poles see FAQ section)
$ 1.99 ea $.99 ea
$1.93 ea. $.95
ea
#4123
tie-off grommet style for .490" diam
(for use with shockcord)
$2.85 ea
$2.80 ea.
.490" INSERTS
#4141
for .490" diam poles
$1.40 ea.
$1.34 ea.
.490" ENDCAPS
#4058
vinyl end cap for .490" diam
$ .65 ea.
$.60 ea.
.490" 145° ARCH
1 1/2" to top of arch (measurement does not include the attached inserts)
#4149
for .490" diam poles
$4.75 ea.
call
.490" 125° ARCH
1 5/8" to top of arch (measurement does not include the attached inserts)
#4148
for .490" diam poles
$4.75 ea.
call
.490" 90° ARCH
~2 5/8" to top of arch (measurement does not include the attached inserts)
#4147
for .490" diam poles
back in stock- while supplies last
$5.90 ea.
call
REPAIR SLEEVES
#4041
for .346" diam poles
(.625" diam)
$1.55 ea.
$1.50 ea.
the #4041 sleeves will
fit poles with diameters .361" to .509"
The repair sleeves are used to reinforce a weakened or broken
pole. Just slide the hollow sleeve over the bad area and crimp
or tape in place. Excellent to have on hand for that emergency
pole repair. The sleeves are a bit larger in diameter than the
poles sizes so that it can slide past kinks in a broken pole.
It is made of a soft alloy metal so that it can be pressed around
the broken area of a pole using pliers or even a rock if necessary.
---------------- Note:
Quantities over 100 pcs may require a special order
